Q: Is my mill covered by a guarantee?
A: Yes, all of our salt and pepper mills are covered with a lifetime mechanism guarantee, despite what your item packaging may say. Electronic mill mechanisms also have lifetime cover, however battery cell units are covered for two years. Accidental breakage and damage from misuse are not covered by the mechanism guarantee.
Q: How long is the manufacturer's guarantee?
A: For mills, our manufacturer's guarantee covers any other parts outside of the lifetime mechanism guarantee for 2 years from the date of purchase. On non-mill items, the manufacturer's guarantee is 2 years on all parts.
Q: Are the electrical parts of my electronic mill covered by any guarantee?
A: Yes, the battery cell unit (where the batteries are put) is covered for 2 years from the date of purchase.
Q: How do I change the grind setting of my mill?
A: If your mill has a knob, turn this anti-clockwise for a coarser setting or clockwise for a finer setting. The knob will either be located on the top of the mill, or on the base depending on which mill you have.
Q: Can the mechanism on my mill be replaced?
A: Mechanisms cannot be replaced as they are built into the mill. However there is a lifetime guarantee on all mechanisms.
Q: Can I put salt in my pepper mill and vice versa?
A: This depends entirely on the mechanism. Salt can only be used in a mill that has a nylon or ceramic mechanism. Salt cannot be used in a carbon steel mechanism. Pepper can only be used in a mill that has a ceramic or carbon steel mechanism. Pepper cannot be used in a nylon mechanism. The only mills where salt and pepper can both be used are if they have a ceramic mechanism.
Q: My salt mill appears to be clogged up, what should I do?
A: Firstly, ensure that the salt you use in your mill is perfectly dry and free flowing and always keep your refill container in a dry place. Adding a few grains of rice to the salt in the mill helps to absorb any latent moisture in the salt. The rice will be ground up with the salt and will be noticeable in your food.
Q: Can I put my mills in dishwashers or ovens?
A: No, Cole & Mason Mills cannot be put in dishwashers or ovens.
Q: What is the best way to clean my mills?
A: The best way to clean a mill is to use a damp (not wet), colorless cloth. After cleaning, dry the mill straight away - do not leave wet. The mechanisms should not be rinsed, submerged in water, placed on a wet surface or get wet in any way. Please do not use cleaning products on the mills, for example, anti-bacterial spray.
Q: Why has my mill gone rusty/moldy?
A: There primary reason why your mill would have rusted / produced mold, is water exposure. This includes putting the mill in the dishwasher, washing it in a sink, wiping with a damp cloth and not drying after. Incorrect storage, like leaving the mill in a damp place or leaving it outdoors could also cause rust or mold.
Q: Why has the salt in my mill become discolored and is it harmful for me to still eat the salt?
A: Your salt mill could have gotten discolored due to water exposure, food residue stuck at the base, storing in a damp place or being left on an unclean surface. We would advise that you do not eat the salt and dispose of any that may have come into contact with the discoloration. If the mechanism has discolored, it cannot be washed and should not be used.
Q: Where are Cole & Mason salt and peppercorns sourced from?
A: Our salt is currently sourced from Belgium and peppercorns are sourced from Vietnam.
Q: How can I change the light in my mill?
A: It is not possible to replace the light in any electronic mills. All light bulbs in mills are LED and have a long-life expectancy.
Q: What types of salt can be used in Cole & Mason salt mills?
A: You can use sea salt, rock salt and Pink Himalayan rock salt in mills with a nylon mechanism. However, we would recommend using a mill with a ceramic mechanism for prolonged use. Rock salt is harder than sea salt and will wear down the mechanism quicker over time. However this is less likely to happen with a ceramic mechanism.
Q: Can I use pink or red peppercorns in my mill?
No, red and pink peppercorns come from a berry. They naturally have more liquid, so we recommend not using these as it could corrode the mechanism.
Black and white peppercorns are recommended in our pepper mills. If you would like to use pink or red, use a mill with a ceramic mechanism or use our pestle & mortar.